The unit has been custom made according to the wishes of
the customer.
Click each photo for a larger image
General description
The customer required pine suitably coloured to match
among other things the existing pine doors. It had to be
shaped to fit into the corner of the room, support the TV
etc and yet, allow the door to open fully.
A master template was made. The top and base were made by
biscuit jointing several boards together. These were cut
according to the template.
The plinth was made by gluing a series of blocks together
and also cut through following the template.
The bottom of the unit sits on the carpet. The top shelf
is buttoned to a batten affixed to the wall.
The colour and finish is achieved using several coats of
thinned button polish rubbed on then cut back and wax
polished.
